0102030405
Advanced Water Immersion Ultrasonic Scanning Microscope
Application
Low cost, according to the 20/80 principle, to meet the rapid sampling of 80% of the batch workpieces on the workshop site, with a smaller footprint, effectively used in the process control of the production line. Suitable for small physical and chemical laboratories or the workshop site.
Test items
- Welding quality inspection of low-voltage electrical appliances
- Silverpoint internal defect quality inspection
- Corrosion verification and inspection of weld defects
- Integrated circuit packaging and welding quality inspection
- Quality inspection of diamond tools
- Composite sheet layer thickness inspection/combined defect detection
- Welding quality inspection of oil sheets
- Knife grain welding quality inspection
- Welding quality inspection of power electronic devices
- Water-cooled heat sink runner and welding quality inspection
- Piezoelectric ceramic internal porosity quality inspection
Product Specification
| Model | NZMS |
| Maximum scanning range | 200mm× 100mm×50mm |
| Positioning accuracy of the motion table | ’+0.5um in the X/Y direction, 10um in the Z direction±Machine size: 0.5mx0.5mx0.4m |
| Recommended image resolution | 1um~4000um; |
| Typical scanning time | < 45s (test conditions: scanning area 10mmX10mm, resolution:Rate 50um) |
| Maximum scanning speed | 300mm/s |
| Maximum scanning acceleration | 5m/s2; |
| Repeat positioning accuracy | X/Y to S+0.01mm; Z ≤ +0.02mm |
| Power supply | 220V/50Hz; 1kW |
| Sampling frequency | 25~250MHz; (Standard, upgradable to 1.5GHz) |
| Probe frequency range | 1~50MHz; (Standard, upgradable to 230MHz) |
| Adjustable gain per channel | - 13~66dB; (Standard, upgradeable) |
| Pulse repetition rate | 5kHz; (Standard, upgradeable) |
Basic Functions
Silverpoint internal defect quality inspection
